How to move Power Failure Alert to another WiFi network?

If you need to reset your Power Alert to the factory settings or simply need to re-configure it to use another WiFi router, you need to erase old WiFi information first. How is it done?

  1. Unplug your Power Alert device from A/C
  2. Pop the lid using a flat screwdriver in one of the two slots
  3. Remove one battery
  4. Locate and push the CLEAR button. While keeping the CLEAR button depressed, plug your Power Alert in A/C
  5. After 20 sec release the CLEAR button. Your device has been cleared of WiFi information
  6. Unplug your device and leave it unplugged for 30 sec
  7. Insert the third battery back in and plug the device into A/C

Your Power Alert is ready to be configured with a new WiFi network.

FAQ_Category: 
Power