Dual Sensor Water and Temperature (WT) Edition:  enjoy all the benefits of the Rugged MySpool Water Alert with an added Temperature sensor.

The added high-quality temperature sensor can be operated in two modes.  One  mode sends alerts when temperature goes above or below your thresholds. And the second mode allows you to send data to a ThingSpeak channel for display and analysis. See here for directions on how to setup this free data channel.

The enclosure of the Water  and Temperature Alert will support 300 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. It has mounting holes for screws and a gasket to provide better protection to the smart electronics inside.  

Water and Temperature Alert comes with an extra long 6 ft power cord and two hardened sensors:  a water sensor with a 5 ft wire and a temperature sensor with a 3ft wire. High quality moisture sensor has a nickel plated surface for corrosion resistance. It is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C. All readings outside this range are ignored: -30°C to +105°C or -22°F to +221°F

Note: Water alerts can be sent as a text message, email, pushbullet or any combination of the three. Temperature alerts are sent only as email or pushbullet notifications.