• Wireless alert at over 1200 feet; WiFi required for the HUB
• Email and text message notification when you get mail
• Easy installation and configuration: you choose when the alert is active
• Uses 3 AAA batteries, included

Turn your mailbox into a SmartMailbox: get a text message and an email when your mailbox door is opened. Save a trip to check your mail in bad weather. Requires WiFi within 200 ft of the HUB. Installation required.

This set includes a Mailbox Alert Node and a MySpool HUB. The Node and the HUB communicate over the air. The HUB requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Mailbox Alert which uses WiFi and does not require a MySpool HUB. Our tests have shown reliable alerts sent at 250 feet by a standard MySpool  Mailbox Alert and at 1600 feet by the Mailbox Alert Extended Range Set, both at line of sight. 

• Wireless alert at over 1200 feet; WiFi required for the HUB
• Email and text message notification when you get mail
• Easy installation and configuration: you choose when the alert is active
• Uses 3 AAA batteries, included
• Existing External Mailbox Alert required for conversion

Turn your mailbox into a Smart Mailbox: get a text message and an email when your mailbox door is opened. Save a trip to check your mail in bad weather. Requires WiFi within 200 ft of the HUB. Installation required.

This set includes a replacement chip for an External Mailbox Alert  and a MySpool HUB. The chip converts your installed External Mailbox Alert into a Extended Range Mailbox Node. The Node and the HUB communicate over the air. The HUB requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Mailbox Alert which uses WiFi and does not require a MySpool HUB. Our tests have shown reliable alerts sent at 250 feet by a standard MySpool  Mailbox Alert and at 1600 feet by the Mailbox Alert Extended Range Set, both at line of sight. 

• Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications.
• Email and text message notification when water is detected. Every Node can specify a phone number and up to five email addresses.
• Professional set includes 6 Water Alert Nodes and one Hub:  Alert units are impervious to EMF and other interference, capable of communicating with the Hub through wood and cinder block walls at long distances.
• Additional Water Alert Nodes can be added as needed.
• Requires WiFi within 200 ft of the Hub.

This set includes 6 Water Alert Nodes and a MySpool Hub. The Node and the HUB communicate over the air. The Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water Alert which uses WiFi and does not require a MySpool Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Water Alert and at over 1200 feet by Water Alert Nodes.  Water Alert Nodes can be placed in locations without WiFi access and still reliably communicate with MySpool Hub.  

Every node has its own configuration and can specify one telephone number for text messages and up to five email addresses.

MySpool Hub is monitored by the cloud servers.  Issues with power or WiFi are reported so corrective action can be taken.

All MySpool services including monitoring, email and text message notifications are free.

Note: this Professional Set can be further enhanced with additional Hubs which will provide hardware redundancy.  And additional Nodes can be added at any time.  Call to speak to a specialist for a custom configuration.

• Add-on to Water Alert Professional set, does not function in standalone mode 
• Water Alert Nodes require a MySpool Hub  to communicate with cloud services
• Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications
• Email and text message notification when water is detected

This Water Alert Node can be added to Water Alert Professional set. Up to 128 Nodes can be added to the set. Additional Hubs can be deployed to provide full hardware redundancy.

The Node and the Hub communicate over the air. Only the Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water Alert which uses WiFi and does not require a MySpool Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Water Alert and at over 1200 feet by Water Alert Nodes.  Water Alert Nodes can be placed in locations without WiFi access and still reliably communicate with MySpool Hub.

Dual Sensor Water and Temperature (WT) Edition:  enjoy all the benefits of the Rugged MySpool Water Alert with an added Temperature sensor.  Use multiple Nodes with one Hub to both extend range and simplify deployment.

• Water and Temperature Nodes require a MySpool Hub  to communicate with cloud services, it does not function in standalone mode. The Hub comes with  Extended Range Mail, or  Water Alert Professional set.
• Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications
• Email and text message notification when water is detected or Temperature exceeds high or low threshold

The Node and the Hub communicate over the air. Only the Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water and Temperature Alert which uses WiFi and does not require a Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Water and Temperature Alert and at over 1200 feet by Water and Temperature Alert Nodes.  Water and Temperature Alert Nodes can be placed in locations without WiFi access, behind stucco and cinder block walls,  and still reliably communicate with MySpool Hub as long as they are within 1200 feet of each other.

The added high-quality temperature sensor can be operated in two modes.  One  mode sends alerts when temperature goes above or below your thresholds. And the second mode allows you to send data to a ThingSpeak channel for display and analysis. See here for directions on how to setup this free data channel.

The enclosure of the Water and Temperature Alert will support 300 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. It has mounting holes for screws and a gasket to provide better protection to the smart electronics inside.  

Water and Temperature Alert comes with an extra long 6 ft power cord and two hardened sensors:  a water sensor with a 5 ft wire and a temperature sensor with a 3ft wire. High quality moisture sensor has a nickel plated surface for corrosion resistance. It is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C. All readings outside this range are ignored: -30°C to +105°C or -22°F to +221°F

Note: Water alerts can be sent as a text message, email, pushbullet or any combination of the three. Temperature alerts are sent only as email or pushbullet notifications. 

• Water Level Alert Nodes require a MySpool Hub  to communicate with cloud services, it does not function in standalone mode. The Hub comes with  Extended Range Mail, or  Water Alert Professional set. It can also be purchased separately.
• Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications
• Email and text message notification when water is detected or Temperature exceeds high or low threshold

The Node and the Hub communicate over the air. Only the Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water Detector which uses WiFi and does not require a Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Detector and at over 1200 feet by Water Level Alert Nodes.  These Nodes can be placed in locations without WiFi access, behind stucco and cinder block walls,  and still reliably communicate with a MySpool Hub as long as they are within 1200 feet of each other. 

Smart Design:  

3 AAA batteries and smart circuitry inside ensure long-lasting operation: float switch activates the device when it rises up to the black o-ring marker and transmits an alert to our cloud servers. That alert then gets sent as a text message, email, or a push notification - and the device gets turned off. Batteries last for years if there are no alerts, they are limited by their shelf life only since MySpool Water Level Alert does not require any current in stand-by mode.

Dual use:  

As shipped, Water Level Alert Node is used to send notifications when water level goes up. Flip the float and use it to send notifications when water level goes down. Aquariums, ponds, storage tanks - anywhere you require notifications when water level goes down below desirable level.

The enclosure of the Water Level Alert Node will support 250 lbs. You can step on it in the dark and not worry about destroying it. It has mounting holes for screws so it can be mounted up to 3 feet away from the float switch.  

Water Level Alert Node comes with a waterproof float sensor with a 3 ft wire.

• Wireless alert at over 1200 feet; WiFi and A/C required 
• Works as a gateway for MySpool Nodes:  Mailbox, Water, Water and Temperature
• Hub can support up to 64 nodes
• Nodes can be added at any time

MySpool Hub uses LoRa technology to enable communications at over 1200 feet through walls and other obstacles. It should be placed within 200 ft of the WiFi router for optimum performance. Supported Nodes:  Mailbox Alert Node,  Water Alert Node, Water and Temperature Node.