• Plug it into A/C outlet.  A 180 second timer will start a countdown to indicate when your device is ready.
• Connect your device to WiFi 
• Create a new account on myspool.com and click on email link to confirm it or login to your existing account
• Confirm your email subscription for this device to receive alert notifications
• Wait until the 180 second timer is off. Push the Test button. You should receive and email notification. Now you can go to MY DEVICES  and add your telephone number, additional emails and change other settings.

GAS Alert placement

Gas/CO Alert needs to be plugged in. One requirement for the Gas/CO Alert location is that a WiFi network is available to access Myspool cloud servers.

Natural gas is mostly methane: being lighter than air it rises and accumulates in the ceiling area. So if you have natural gas in your kitchen, place MySpool GAS/CO Alert about a foot below the ceiling and a few feet away from the gas source.

LPG is a mixture of propane and butane. It is heavier than air and tends to go down. So if you have LPG, propane or butane gas source, place MySpool GAS/CO Alert about a foot above ground and a few feet away from the gas source. Please refer to the diagram for installation hints

To test, press the TEST on the Gas/CO Alert. You can also use a butane lighter without the flame: hold it under the sensor for a few seconds. You should get an email and a text message within a minute.

Please remember that the portal limits the number of Gas/CO alerts to one every 5 minutes. So you may need to wait for 5 minutes to get a second text message. Email and pushbullet notifications are limited to 1 per minute.