Two Sensors: enjoy all the benefits of the Rugged Water Alert with two separate hardened water sensors in a rugged enclosure with a transparent cover.
The enclosure of the Dual Sensor Water Alert can support up to 250 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. The clear cover shows two separate green water sensors' power and moisture detection LEDs. It also shows the blue signalling LED which indicates alert transmission. The enclosure has mounting holes for screws and a gasket to provide better protection to the smart electronics inside. Note: some of the clear covers may show scuff marks and minor scratches. This is due to the manufacturing imperfections at the factory and is reflected in the price of these units.
The Dual Sensor Water Alert comes with two hardened sensors with a 5 ft wire. The sensors work independently of each other. All notifications, including text messages, email and pushbullet indicate which sensor is sending the alert.
You are here
Be Alerted of Leaks While away from Home or Business MySpool Water Alert is a smart water sensor that sends email, text, and smartphone alerts to homeowners, renters, business owners, and property managers as soon as a water leak is detected. Avoid costly repairs by keeping the Water Alert anywhere that has the potential for flooding or developing a leak.
No Hub Required With Myspool Water Alert you avoid the limitations of other hub-based and wired products. Each Water Alert works independently with your Wi-Fi network. The Water Alert can be placed in multiple locations throughout your home or business. Your notifications will include your text for each Water Alert that you specify in the device configuration. Name your location and place it near sinks, refrigerators, washers, sump pumps and in basements.
No Fees There are no fees for using Myspool Water Detector for any kind of alert notifications.
Flexible design Myspool Water Alert comes with an extra long 6 foot power cord connected to an enclosure with a transmitter. The enclosure can be placed on a shelf, mounted on any smooth surface with included double sided pads, or simply left on the floor. The actual water sensor is nickel plated to resist oxidation. It is connected to the enclosure with a set of wires over 2 feet long. This allows the sensor to be placed in hard to reach places, including a crawl space or a sump pump bucket. The only requirement for the Water Alert location is that a WiFi network is available to access Myspool cloud servers.
A must-have For renters, homeowners, property managers, and business owners everywhere, the Water Alert is a must-have device, saving you thousands of dollars in damage and costly repairs. Avoid the hassle and headache and get your Water Alert today.
Battery Powered (BP) Edition: enjoy all the benefits of the Rugged MySpool Water Alert that runs on batteries and uses a float switch.
3 AAA batteries and smart circuitry inside ensure long-lasting operation: float switch activates the device when it rises up to the black o-ring marker and transmits an alert to our cloud servers. That alert then gets sent as a text message, email, or a push notification - and the device gets turned off. Batteries last for years if there are no alerts, they are limited by their shelf life only since MySpool Water Alert does not require any current in stand-by mode.
The enclosure of the BP Water Alert will support 250 lbs. You can step on it in the dark and not worry about destroying it. It has mounting holes for screws so it can be mounted up to 3 feet away from the float switch.
BP Water Alert comes with a waterproof float switch with a 3 ft wire.
Rugged Edition: enjoy all the benefits of the standard MySpool Water Alert in a Rugged Enclosure designed to withstand dirt, dust and other unpredictable operating conditions.
The enclosure of the Rugged Water Alert will support 250 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. It has mounting holes for screws and a gasket to provide better protection to the smart electronics inside.
Rugged Water Alert comes with a hardened sensor with a 5 ft wire.
Dual Sensor Water and Temperature (WT) Edition: enjoy all the benefits of the Rugged MySpool Water Alert with an added Temperature sensor.
The added high-quality temperature sensor can be operated in two modes. One mode sends alerts when temperature goes above or below your thresholds. And the second mode allows you to send data to a ThingSpeak channel for display and analysis. See here for directions on how to setup this free data channel.
The enclosure of the Water and Temperature Alert will support 300 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. It has mounting holes for screws and a gasket to provide better protection to the smart electronics inside.
Water and Temperature Alert comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft wire and a temperature sensor with a 3ft wire. High quality moisture sensor has a nickel plated surface for corrosion resistance. It is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C.
Note: Water alerts can be sent as a text message, email, pushbullet or any combination of the three. Temperature alerts are sent only as email or pushbullet notifications. A separate SMS package is required to send Temperature alerts as text messages.