$39.99
  • Instant emergency alert with no hidden fees
  • Get help at the push of a button: send a text message and an email instantly
  • Built-in transmitter uses your WiFi to communicate with cloud-based servers
  • 3 AAA batteries are included
  • A CALLME button sends a text message or an email or both using your WiFi. The setup takes a few minutes with a smart phone or a laptop and requires a valid email address and a phone number. You can specify hours of operation or disable your CALLME button if needed. You can also specify email and text message content.

    $69.99

    We took an advanced Gas Sensor and added our secret sauce: we made it into a Smart Gas Alert. Myspool Gas Alert gives you all the functionality of a first rate Gas Sensor: it detects explosive gases such as natural gas (methane) and LPG (propane). It sounds a loud alarm, has a display that shows detected gas concentration, and has been extensively tested.
     
    Like all MySpool devices, Gas Alert is also a smart device that sends out an alert when Gas is detected by its sensor. That alert is a message, either via email or text, or both. Optionally, this device can also send you pushbullet notifications. Gas Alert is configured to use your WiFi. The setup takes a few minutes with a smart phone or a laptop. 
     
    There are no fees for using Myspool Gas Alert for any kind of alert notifications. One requirement for the Gas Alert location is that a WiFi network is available to access Myspool cloud servers.

    $129.99
  • Wireless alert at over 1200 feet; WiFi required for the HUB
  • Email and text message notification when you get mail
  • Easy installation and configuration: you choose when the alert is active
  • Uses 3 AAA batteries, included
  •  
    Turn your mailbox into a SmartMailbox: get a text message and an email when your mailbox door is opened. Save a trip to check your mail in bad weather. Requires WiFi within 200 ft of the HUB. Installation required.
    This set includes a Mailbox Alert Node and a MySpool HUB. The Node and the HUB communicate over the air. The HUB requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Mailbox Alert which uses WiFi and does not require a MySpool HUB. Our tests have shown reliable alerts sent at 400 feet by a standard MySpool  Mailbox Alert and at 1600 feet by the Mailbox Alert Extended Range Set, both at line of sight. 

    $49.99
  • Wireless alert at over 400 feet; WiFi required
  • Email and text message notification when you get mail
  • Easy installation and configuration: you choose when the alert is active
  • Uses 3 AAA batteries, included
  •  
    Turn your mailbox into a SmartMailbox: get a text message and an email when your mailbox door is opened. Save a trip to check your mail in bad weather. Requires WiFi within 400 ft of the mailbox. Installation required.

    $49.99
  • Wireless alert at over 400 feet; WiFi required
  • Email and text message notification when you get mail
  • Easy installation and configuration: you choose when the alert is active
  • Uses 3 AAA batteries, included
  • NOT FOR USE INSIDE METAL MAILBOXES
  •  
    Turn your mailbox into a SmartMailbox: get a text message and an email when your mailbox door is opened. Save a trip to check your mail in bad weather. Requires WiFi within 400 ft of the mailbox. Installation required.

    $39.99
  • Be Alerted of Leaks while away from home or business: MySpool Water Alert uses Wi-Fi to send text messages, email or push alerts when water is detected
  • Name each Water Alert during set up and send notifications to identify the source of the leak
  • Each MySpool Water Alert is independent; no hub is required
  • WiFi access at the Water Alert location is required, please check before ordering
  •  
    Be Alerted of Leaks While away from Home or Business MySpool Water Alert is a smart water sensor that sends email, text, and smartphone alerts to homeowners, renters, business owners, and property managers as soon as a water leak is detected. Avoid costly repairs by keeping the Water Alert anywhere that has the potential for flooding or developing a leak.
     
    No Hub Required With Myspool Water Alert you avoid the limitations of other hub-based and wired products. Each Water Alert works independently with your Wi-Fi network. The Water Alert can be placed in multiple locations throughout your home or business. Your notifications will include your text for each Water Alert that you specify in the device configuration. Name your location and place it near sinks, refrigerators, washers, sump pumps and in basements.
     
    No Fees There are no fees for using Myspool Water Detector for any kind of alert notifications.
     
    Flexible design Myspool Water Alert comes with an extra long 6 foot power cord connected to an enclosure with a transmitter. The enclosure can be placed on a shelf, mounted on any smooth surface with included double sided pads, or simply left on the floor. The actual water sensor is nickel plated to resist oxidation. It is connected to the enclosure with a set of wires over 2 feet long. This allows the sensor to be placed in hard to reach places, including a crawl space or a sump pump bucket. The only requirement for the Water Alert location is that a WiFi network is available to access Myspool cloud servers.
     
    A must-have For renters, homeowners, property managers, and business owners everywhere, the Water Alert is a must-have device, saving you thousands of dollars in damage and costly repairs. Avoid the hassle and headache and get your Water Alert today.
     

    $49.99

     
    Rugged Edition:  enjoy all the benefits of the standard MySpool Water Alert in a Rugged Enclosure designed to withstand dirt, dust and other unpredictable operating conditions.
     
    The enclosure of the Rugged Water Alert will support 250 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. It has mounting holes for screws and a gasket to provide better protection to the smart electronics inside.
     
    Rugged Water Alert comes with a hardened sensor with a 5 ft wire.

    $69.99
  • Add-on to Water Alert Commercial set, does not function in standalone mode 
  • Water Alert Nodes require a MySpool Hub  to communicate with cloud services
  • Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications
  • Email and text message notification when water is detected
  •  
    This Water Alert Node can be added to Water Alert Commercial set. Up to 64 Nodes can be added to the set. The Node and the Hub communicate over the air. The Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water Alert which uses WiFi and does not require a MySpool Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Water Alert and at over 1200 feet by Water Alert Nodes.  Water Alert Nodes can be placed in locations without WiFi access and still reliably communicate with MySpool Hub.

    $449.99
  • Wireless alert at over 1200 feet, through walls and other objects which interfere with WiFi communications.
  • Email and text message notification when water is detected. Every Node can specify a phone number and up to five email addresses.
  • Commercial set includes 6 Water Alert Nodes and one Hub:  Alert units are impervious to EMF and other interference, capable of communicating with the Hub through wood and cinder block walls at long distances.
  • Additional Water Alert Nodes can be added as needed.
  • Requires WiFi within 200 ft of the Hub.
  •  
    This set includes 6 Water Alert Nodes and a MySpool Hub. The Node and the HUB communicate over the air. The Hub requires WiFi to send alerts to MySpool cloud servers. This combination greatly increases the range of the standard MySpool Water Alert which uses WiFi and does not require a MySpool Hub. Our tests have shown reliable alerts sent at 300 feet by a standard MySpool Water Alert and at over 1200 feet by Water Alert Nodes.  Water Alert Nodes can be placed in locations without WiFi access and still reliably communicate with MySpool Hub.  
    Every node has its own configuration and can specify one telephone number for text messages and up to five email addresses.
    MySpool Hub is monitored by the cloud servers.  Issues with power or WiFi are reported so corrective action can be taken.
    All MySpool services including monitoring, email and text message notifications are free.

    $62.99

     
    Two Sensors:  enjoy all the benefits of the Rugged Water Alert with two separate hardened water sensors in a rugged enclosure with a transparent cover.  
    The enclosure of the Dual Sensor Water Alert can support  up to 250 lbs. You can step on it in the dark and not worry about destroying it. It is also more water resistant than a standard Water Alert enclosure. The clear cover shows two separate  green water sensors' power and moisture detection LEDs.  It also shows the blue signalling LED which indicates alert transmission. The enclosure has mounting holes for screws and a gasket to provide better protection to the smart electronics inside. Note:  some of the clear covers may show scuff marks and minor scratches. This is due to the manufacturing imperfections at the factory and is reflected in the price of these units.
     
    The  Dual Sensor Water Alert comes with two hardened sensors with a 5 ft wire. The sensors work independently of each other. All notifications, including text messages, email and pushbullet indicate which sensor is sending the alert.